The fastest delivery time is 1 week, with an average delivery time not exceeding 2 weeks.

Yes, our products have CE certification.

Under normal conditions, the service life is 6 to 10 years.

Yes.Our robots can work very well with vision system.

Yes.We provide tailord robot body color, cabinet colour, customized LOGO and nameplate, language etc.

Our product preparation time is about15 working days.

lf we have robots instock,we can send out immediately.

Pay a 30% deposit upfront, with the remaining 70% due upon completion of the robot.

If you become our agent, we can regularly pre-package some accessories with the robot. Under normal circumstances, if there is a quality issue with the accessories during the warranty period and a video needs to be taken and our engineers diagnose the accessory failure, we will provide the accessories for free and it is expected to take about 7 days to arrive at your hands.

It will be determined according to the specific country and region. If there is no exclusive agent in the country or region, it will be supported; the cooperation period is 1 year and 1 visa;

The price during the cooperation period will increase or decrease as costs change, but we will inform you one month in advance.

72 hours

The ST series supports by default: EtherCAT, Ethernet/IP, CAN, OPC-UA, FinsTCP, TCP/IP, ModbusTCP, ModbusRTU

The ST series needs to add a conversion board to support: OPC-UA FinsTCP Profinet;

The SR series supports by default: TCP/IP, ModbusTCP, ModbusRTU; Ethernet/IP in the SR series requires additional hardware

About Profinet; SR series only supports I/O communication; ST series supports I/O communication, digital transmission and other robot control instruction transmission

1. Zero point loss: Perform zero-point calibration

2. Loss after TCP collision: Perform 20-point calibration

3. Programmed point offset: Calibrate points manually; or reset the user coordinate system

Laser tracking equipment can be utilized.

Typically, a 200mm deep concrete foundation is sufficient; the absolute minimum is 100mm.

Once the floor track is positioned, simply secure it with anchors.

We need to confirm the material for the spray application:

Powder coating: Currently available for all ST robot models

Paint spraying: Requires confirmation and customization of the robot with us

Four-axis robots can be used for stamping.

Option 1: Secure the entire assembly with spot welding before proceeding with full welding.

Option 2: Incorporate a laser tracker.

For specific scenarios, please consult our technical personnel.

For protection level F, temperatures below 100°C are normal due to high loads, and the noise is also normal.

This depends on the quality of the nozzle and the frequency of use.

The conductive nozzle should be replaced only when the aperture becomes worn or the conductivity deteriorates.

Yes, we do. The model is ST10-C1488K. It saves space, eliminates the need for a base, and offers a more aesthetically pleasing design.

Yes, it does.

Tubular welding wire is also known as flux-cored wire.

It works by incorporating filler material within the wire itself, eliminating the need for shielding gas.

The configuration requirements are the same.

Situations where wire feed speed can be adjusted:

1. Slow wire feed

2. Speed in manual wire feed mode

During normal welding, the wire feed speed is automatically matched based on current values and adaptive algorithms and cannot be adjusted.

Yes, the customer gives the welding brand name; if the company has not adapted this brand of welding machine, the customer needs to send the welding machine to the company for adaptation.

You can apply to the company

Yes, but it is best to use our standard welding machine. If you have other needs, you must provide the company with the welding machine brand and model;

If the welding machine is a foreign niche brand, the customer still needs to send the welding to the company for matching.

Depending on the quantity of robots purchased by customers, we will send some accessories for free to prepare.

Maximum welding speed: 600 mm/min

Maximum idle travel speed: 15,000 mm/min

It can perform continuous welding at temperatures ranging from 0 to 50 degrees Celsius.

Mainly ensure waterproofing.

Aluminum thickness greater than 1 mm; gas shielded welding thickness greater than 2 mm.

Primary supported processes: MIG, MAG, pulse, DC, TIG (argon arc welding), laser welding

TIG welding requires a wire-feeding torch

Pulse welding is primarily used for thick plates, with the advantage of minimal spatter

Specific support confirmation requires verification of material parameters

No data or testing is currently available. The recommended solution is to use windshields and flux-cored welding wire.

Windshields must be purchased or customized by the customer based on their specific circumstances.

Based on practical testing, our collaborative robots do not experience overload failures during normal continuous use,

and will issue an alarm when the load exceeds capacity.

Our collaborative welding robot configuration includes a water-cooling system, similar to air conditioning for cooling purposes.

This ensures the welding torch maintains a consistent temperature and prevents burns to workers, so no additional components are required to regulate the robot's temperature.

The manual states the operating temperature range is 0° to 45°, but our practical testing shows the robot functions reliably within a temperature range of -10° to 50°.

Currently supported languages: Russian, Korean, Chinese, English, Italian, Spanish

For other languages requiring customization, requests can be submitted.

Yes, it does.

It supports collaborative operation but does not support linked operation.

General Welding: 3-phase 5-wire 380V 50-60Hz (3 live wires, 1 neutral wire, 1 ground wire)

Laser Welding: If the customer site has 220V 50-60Hz, lasers rated below 3kW are directly supported; lasers above 3kW require 3-phase 5-wire 380V support.

Yes, the security inspection equipment quick keys include:

Point capture, Arc switching, Process switching, Empty run, Start, Spot welding, Clear weld bead, Undo.

We not only provide API secondary development interfaces, but also provide ROS development

The actual shipment volume in one month was 500 units

The fastest delivery time is 1 week, and the average delivery time is no more than 2 weeks